Home IoT System for a convenient smart home
SMART Home KitSMART Home Kit
Smart Home Kit
You can set up a Wi-Fi router at home to a smart hub through a mobile device, register IoT devices, and easily control it with a mobile app from outside.
It is recommended to install it near a Wi-Fi router and supplies power using a USB Type-C cable.
CWP-SH-ZBWF
Wi-Fi & ZigBee V3.0
DC 5V (USB-C TYPE)
100 X 100 X 35.4 mm
Interlocking with other smartphones, interworking with IoT devices
Gateway
After replacing the existing switch and installing it, you can turn the light on and off from outside by registering the switch with the app.
You can turn on the lights when your pet is alone or before going home.
AC 220V (AC~)
120 X 120 X 54 mm
Light ON/OFF control
You can remotely control home appliances by plugging the control plug into a general outlet.
When you go out, you can check the status with your smartphone when the plug power is not turned off, and you can control ON/OFF.
AC 220V, 16A
50 X 50 X 83 mm
Manual ON/OFF possible
Check the condition of the gas valve from the outside,
You can lock it.
The valve can be closed automatically using the timer function, and the time can be set. You can check the status in real time because notifications come to your smartphone.
DC 6V (AA Battery)
70 X 143 X 74 mm
Timer time setting, voice support
The human body sensor can be used by attaching it to a desired location such as the ceiling or wall.
When motion is detected by the sensor, you can check it with a real-time app notification.
DC 3 V (CR123A Battery)
8m
48.4 X 53.4 mm
Battery replacement alarm
After attaching the door sensor to the front door, window, drawer, etc. and registering the sensor with the app, you can check that the door, window, drawer, etc. are opened with the app.
DC 3V (CR2032 Battery)
More than 1 year (based on 20 times a day)
Main 52.6 X 26.5 X 13.8 mm
Magnet 25.5 X 12.5 X 13 mm
Battery replacement alarm LED